HC8300FCN39H Filter Elements / Folding Filter Cartridge -30 To 110 Degrees Celsius

Product Description:

Installation of PALL Filter Element

The PALL filter element is an important component in a hydraulic system that helps to filter out pollutants and impurities that may cause damage to the various components of the system. There are different ways in which the filter element can be installed depending on its location:

1. Suction Port of the Pump

A surface type oil filter is usually installed on the suction path of the pump to filter out larger impurities and particles to protect the hydraulic pump. To ensure that the filter works effectively, its filtering capacity should be more than twice the pump flow rate, and the pressure loss should be less than 0.02 MPa.

2. Outlet Oil Circuit of the Pump

The purpose of installing the PALL filter element on the outlet oil circuit of the pump is to filter out pollutants that may enter components such as valves. Its filtration accuracy should be 10-15 μ m, and it should be able to withstand the working pressure and impact pressure on the oil circuit, with a pressure drop of less than 0.35 MPa. It is also important to install a safety valve to prevent oil filter blockage.

3. Return Oil Line of the System

The PALL filter element is installed on the system's return oil line as an indirect filter. A back pressure valve is installed in parallel with the filter to open when the filter becomes clogged and reaches a certain pressure value.

4. System Branch Oil Circuit

The PALL filter element can also be installed on the system branch oil circuit to filter out pollutants that may enter specific components.

5. Separate Filtration System

Large hydraulic systems can be equipped with a dedicated hydraulic pump and oil filter to form an independent filtration circuit. In addition to the oil filter required for the entire system, a dedicated fine oil filter is often installed in front of some important components (such as servo valves, precision throttle valves, etc.) to ensure their normal operation in the PALL filter hydraulic system.

Features:

The primary role of a lubrication filter is to provide protection to system components from damage caused by particles of a critical gap size. These particles can enter component gaps and cause wear, which may lead to component failure. Additionally, the filter should control the cleanliness at the specified level to ensure that the maximum component lifespan is achieved.

A filter should also allow fluid to pass through at a given flow rate with a minimum pressure drop (Δ P). The filter must control the level of all pollutant particles, which are critical to the operating system's performance. If the filter fails to provide the required control over destructive particles, it will increase the number of particles generated in the system. This, in turn, will cause more damage by introducing particles into the working gap of components through the wear mechanisms, leading to greater damage and additional particles.

Lubricating oil filtration plays a critical role in the maintenance of any lubrication system, and high-performance lubricating oil applications now specify high-performance filtration technology. The use of high-performance, long-life filters ensures consistent filtration performance across their entire lifespan and helps industrial operations achieve optimum fluid cleanliness, reducing operational costs and ensuring operational efficiency.

Technical Parameters:

Applications:

Petrochemical industries use various filtration technologies to separate and recover products and intermediate products in refining and chemical production processes. Examples include the purification of liquids, magnetic tapes, optical discs, and photographic films in manufacturing, and filtration of oil field well water and natural gas for particle removal.

In the textile industry, filtration is used for the purification and uniform filtration of polyester melt during wire drawing process, protective filtration of air compressor, and removal of oil and water from compressed gas.

In the electronics and pharmaceutical industries, filtration is used for pre-treatment and filtration of reverse osmosis water and deionized water, pre-treatment and filtration of cleaning solution and glucose.

Thermal power and nuclear power facilities use filters for the purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.

Filtration is important in mechanical processing equipment such as lubrication systems and compressed air purification for paper making machinery, mining machinery, injection molding machines, and large precision machinery. Dust recovery and filtration is also necessary for tobacco processing equipment and spraying equipment.

Filtration is necessary for the lubricating oil and engine oil used in railway internal combustion engines and generators.

Automotive engines and construction machinery require various types of filters including air filters, oil filters, fuel filters for internal combustion engines, various hydraulic oil filters, diesel filters, and water filters for construction machinery, ships, and heavy-duty vehicles.

Support and Services:

Our Hydraulic Filter Element product comes with comprehensive technical support and services to ensure optimal performance and longevity of the product. Our team of experts are available to assist with any questions or concerns regarding installation, maintenance, and troubleshooting. We also offer regular maintenance and inspection services to ensure that the filter element is functioning properly and to prevent any potential issues. In the event of a malfunction or failure, we offer repair and replacement services to minimize downtime and maximize productivity. We are committed to providing top-quality technical support and services to our valued customers.

Packing and Shipping:

Product Packaging:

The hydraulic filter element will be packed securely in a cardboard box with appropriate cushioning and protection to ensure safe delivery.

Shipping:

The product will be shipped via a reputable carrier and a tracking number will be provided to the customer once the package has been dispatched.

FAQ:

Q: What is the brand name of the hydraulic filter element?

A: The brand name of the hydraulic filter element is PALL.

Q: What is the model number of the hydraulic filter element?

A: The model number of the hydraulic filter element is HC8300FCN39H.

Q: What is the place of origin of the hydraulic filter element?

A: The hydraulic filter element is made in China.

Q: Is the hydraulic filter element certified?

A: Yes, the hydraulic filter element is certified with CE.

Q: What is the minimum order quantity for the hydraulic filter element?

A: The minimum order quantity for the hydraulic filter element is 1.

Q: What is the price of the hydraulic filter element?

A: The price of the hydraulic filter element is negotiable.

Q: How is the hydraulic filter element packaged?

A: The hydraulic filter element is packaged in cartons or as per the clients' requirements.

Q: What is the delivery time for the hydraulic filter element?

A: The delivery time for the hydraulic filter element is 1-7 work days after payment.

Q: What are the payment terms for the hydraulic filter element?

A: The payment terms for the hydraulic filter element are T/T, Western Union, and Paypal.

Q: What is the supply ability of the hydraulic filter element?

A: The supply ability of the hydraulic filter element is 5000PCs per month.